Stertil-Koni ST4250 Drive on Lift

March 2, 2011

WEIGHT: From 10 to 25 tonnes
USE: Tractor trailers, buses, public works facilities
CONSTRUCTION MATERIAL: High-quality, high-tensile DOMEX steel

FEATURES:

• no cross beams fore or aft allowing a completely open floor
• adjustable runways for multi-wheel base vehicles.
• hydraulic system electrically controlled using potentiometers to monitor vehicle weight displacement and smooth synchronization.
• programmable lifting height, lighting and foot protection.
• combination locking pawl (solenoid activated) and metal ladders on carriage operate independently of drive mechanism
• hose burst valve protection prevents rapid descent in case of hydraulic fluid loss.
• operates as a synchronized pair or independently – necessary when lifting articulated buses, trucks and semi-trailers or with vehicles with an uneven weight distribution such as a truck and crane combination.

Low Drive-on Height: 27″ wide runways enjoy drive-on height of 8 5/8″ for ST4175 and 11″ for ST4250.
Expansive Lifting Height: With 75″ of lifting height.
Adjustable Runways: Runways can be adjusted laterally with a minimum range of adjustment of 6 inches.
Vertical Lifting: The lifts rise vertically (no overhang like a parallelogram). The ST-4250 rises at a rate of 72 seconds.
Flush Mount or Surface Mount: Our Stertil-Koni ST4250 models can be installed either recessed or surface mount.